1、 Overview

At present, carbonate developer is widely used in the development process of dry film and green paint. Because the carbonate contained in the developer combines with calcium and magnesium ions in water to produce solid precipitation, this white precipitation will not only adhere to the tank wall, especially when combined with the ink precipitated in the development process, but also block the pipeline and nozzle, which is easy to cause sequelae such as poor development, which will damage the equipment and reduce the service life of the equipment.

Single liquid developerSEC-SR-536^#In view of the above process problems, it can effectively remove the precipitated solids and dissolve the oily substances in the dry film and green paint. Regular tank cleaning can effectively ensure the production quality and prolong the service life of the equipment.

two、 Technical indicators and operation methods

1. Technical indicators:

Outside View: colorless liquid

than Weight: 1.two0-1.40

PH value: greater than 1two

Flash Point: meaningless (non combustible)

Usage:15-two0%

two. Operating conditions and processing steps:

Temperature:forty-two-fifty℃

Concentration:15-two0%

handleTime:1-two hours (depending on the amount of sediment, the cleanliness of the tank, etc.).

Slot cleaning time: intermittent plate making1-two weeks or 30000-40000 ft continuous production^two

3、handle步骤：

After the developer is completely discharged, inject tap water to the liquid level and circulateDischarge after 10 minutes; Reinjection approxtwo/3Tap water, cover all covers and turn on heating.

According to the volume of tap water15-two0%的than例，加入Single liquid developerSEC-SR-536^#，After the cover plate is covered, start the circulation. Wait until the temperature rises toforty-two℃后循环1-two小时后排放（视污染物清除情况而定）。

At the same time, wash the roller and the groove wall of the developing cylinder with high-pressure water to clean the residual liquid.

Refill clean water to the liquid level and circulate the washing tank10 minutes. Just.

3、 Packaging, storage and precautions

packing:two0L/two00L塑料桶包装；

keep in storage:Avoid direct sunlight and store at room temperature. The validity period is six months.

matters needing attention：This product contains solvent and strong baseIt has corrosive effect and must wear protective articles during operation; In case of contact with eyes or other parts of the body, please wash immediately with plenty of water and see a doctor as appropriate.

对Outside层干膜显影前段污染严重的辊轮，可将其拆下浸泡于原液内，并升温至fifty℃，sixtyTake it out and wash it in minutes.

Where the pollution of the developing tank wall is particularly serious, you can directly wipe it with a rag dipped in the liquid medicine stock solution to swell the caked and hardened ink pollutants before cleaning;

If the ink or film residue is too thick, it must be cleanedtwo-3And increase the concentration for times before it can be thoroughly cleaned.