1、 Overview

Film cleaner sec-158# is a quick drying static remover composed of low boiling solvent. It is suitable for cleaning and removing static electricity of various silver salt films (black film) and diazo films (yellow film). This product replaces the film cleaner containing n-hexane and is applied to the printed board industry to eliminate the harm caused by the neurotoxicity of n-hexane to users. This product also does not contain benzene toxic substances and fluorocarbon compounds that destroy the ozone layer.

Physicochemical properties: This product is colorless, flammable and volatile liquid with slight aromatic smell and low toxicity. It is insoluble in water and has a high dilution ratio with petroleum hydrocarbons. The boiling point is about 80 ℃, and the flash point is - 16 ℃. The density is about 0.78. The flash point and spontaneous combustion temperature are low, which are flammable and explosive chemicals. Fireworks are strictly prohibited during use and storage.

IIproduct quality:

Appearance colorless liquid

Density 0.78 ± 0.02

Boiling range (95% distillate) ℃ 68-80

Nonvolatile matter,% ≤ 0.005

Moisture,% ≤ 0.02

IIIpackageInstallation:

20L / barrel, 200L / barrel, 1-5l / can, tinplate or polyethylene plastic container.本品需密闭package装。

IVusage method:

Clean it with dust free paper, wipe it or spray it with spray, then wipe with dustless paper.

Vmatters needing attention:

1. This product is volatile. Please cover the container and seal it after use. Otherwise, it may volatilize completely in a short time.

2. This product is flammable and has low odor. It is strictly prohibited to contact open fire and heat source; Air circulation shall be maintained in the workplace to prevent the accumulation of combustible gas.

ViStorage and safety:

1. This product is class 3.1 flammable liquid. It must be protected from fireworks and away from heat source during transportation and storage. Store in a cool and ventilated place according to the regulations on inflammables and explosives, and try to avoid large storage.

2. If this product leaks, keep ventilation to prevent flammable gas from accumulating in the air. This product loves the airExplosion range1.5-7.5%。

3. If this product catches fire, evacuate the personnel on site immediately and put out the fire with 1211 fire extinguisher.

4. This product will not have direct harm in contact with human skin, but long-term inhalation of steam may be harmful to the bodyGood health. Therefore, air circulation in the workplace should be maintained as far as possible.